Paint protection film

The paint protection film is a highly transparent film, which serves to protect the vehicle paint from damage such as stone chips, parking damage, insect burns, scratches, vandalism and paint chips. The film is much thicker than conventional paint films and thus the best protection for all painted surfaces.

Protection of the original paint

The film Protects the original paint from damage such as stone chips, scratches, vandalism, scratches, etc..

Thus, the original paint remains undamaged.

Value preservation

Undamaged and repaint-free vehicles achieve a significantly higher sales value.

No risk of color difference

Repainting can lead to an unsightly color difference. The film minimizes the risk of paint damage.

Cost

The paint protection film can protect your vehicle paint for 10 years or even for life. Thus, you save the annual paint polishing. Your vehicle remains scratch resistant for years.

Insured

In the event of damage caused by third parties, your car insurance (if sufficiently insured) will cover the cost of repainting.

No. The film is highly transparent and does not change the original color. Thus, there is no color difference.

Our stone chip protection films are the most durable films on the market today with a 10 year manufacturer’s warranty. This manufacturer’s warranty includes: Yellowing, staining, cracking, blistering and more.

We also provide 2 years warranty on our work.

Yes, our paint protection film has a patented adhesive. The film can therefore be removed without adhesive residue and without residue.

Washing your car is important to keep its paint clean and maintained. Here are some steps you can follow:

1. prepare materials:

Bucket: use two buckets, one for soap solution and one for clear water, to rinse out the sponge or detergent regularly.
Car wash detergent: Use a mild car wash detergent to avoid damaging the paint.
Sponge or wash mitt: Use a soft sponge or a special wash mitt to avoid scratches.
Microfiber cloths: these are good for drying the car and wiping surfaces.
Water hose with adjustable stream: an adjustable stream helps control water pressure.

2 Preparation:

Make sure your car is in the shade to avoid water spots during washing.
If necessary, let the car cool down before it comes into contact with water.
First rinse the car thoroughly with water to remove coarse dirt and dust.

3. washing process:

Dip the sponge or wash mitt into the soap solution and wash the car in sections from top to bottom. Avoid rubbing off dry dirt as this could cause scratches.
Periodically rinse the sponge in a bucket of clean water to remove dirt particles that could cause scratches.
Be sure to be especially gentle on painted surfaces, windshields and chrome parts.
Do not direct high-pressure cleaners directly at the edges of the film. A minimum distance of approx. 80 cm must be maintained.

4. thorough rinsing:

After you have washed the entire car, rinse it thoroughly with clean water to remove all soap residue.

5. drying:

Use clean, soft microfiber towels to dry the car. Blot the water instead of rubbing it to avoid scratches.
Don’t forget to carefully dry the door frames and other hard-to-reach areas.

Yes, we provide a 2-year warranty on all our paint protection films applied by Prime Car Wash team of certified installers. You also receive a 10-year manufacturer’s warranty- the longest and most comprehensive warranty of its kind in Switzerland. We guarantee that your film will not yellow, crackle or peel. Of course, the warranty does not cover damage to PPF caused by accidents, collisions, vandalism, normal wear and tear, or damage caused by products or cleaning agents not recommended for use on PPF. In addition to the warranty, we provide our customers with detailed aftercare consultation and documentation to keep the car looking great for many years to come. For more information, warranty exclusions, full terms and conditions, or aftercare information, please contact a member of the Prime Car Wash team.

Yes, high-pressure cleaners can be used on the paint protection film, provided the film is completely dry (usually after 48 hours) and the high-pressure cleaner is not aimed directly at the film edges. A minimum distance of approx. 80 cm must be maintained. In the event of damage by high-pressure cleaners, this will be visible and cannot be replaced by our or by the manufacturer’s warranty.

Although you can wax the film, make sure the product you use does not contain naphtha or kerosene in concentrations greater than 5%, and also avoid waxes and detailers that contain dyes.

The film gets cut in the cutting plotter 100% accurate fit. In the template, all necessary edges are extended so that the film can be folded over in all possible areas. In the software, almost every single component is available, so that the paint protection films can be individually assembled.